BarinkOS/source/kernel/drivers/pci/pci.cpp
Nigel 520104a43a Moved reading file from disk to its own super visor terminal command
- Updated gdt assembly
- Updated Interrupt service request handlers
- Improved virtual memory manager
- NOTE: we're dependent on identity mappings for the heap to work
2023-02-08 14:07:44 +01:00

251 lines
6.8 KiB
C++

#include "pci.h"
#define PCI_BUS_ADDR_SHIFT 16
#define PCI_DEVICE_ADDR_SHIFT 11
#define PCI_FUNCTION_ADDR_SHIFT 8
#define PCI_ENABLE_ADDR_SHIFT 31
const char* GetClassCodeName (uint64_t ClassCode ) {
switch (ClassCode)
{
case 0x0 :
return "Unclassified";
break;
case 0x1:
return "Mass Storage Controller";
break;
case 0x2:
return "Network Controller";
break;
case 0x3:
return "Display Controller";
break;
case 0x4:
return "Multimedia Controller";
break;
case 0x5:
return "Memory Controller";
break;
case 0x6:
return "Bridge";
break;
case 0x7 :
return "Simple Communication Controller";
break;
case 0x8:
return "Base System Peripheral";
break;
case 0x9:
return "Input Device Controller";
break;
case 0xA:
return "Docking station";
break;
case 0xB:
return "Processor";
break;
case 0xC:
return "Serial Bus Controller";
break;
case 0xD:
return "Wireless Controller";
break;
case 0xE:
return "Intelligent Controller";
break;
case 0xF:
return "Satellite Communication Controller";
break;
case 0x10:
return "Encryption Controller";
break;
case 0x11:
return "Signal Processing Controller";
break;
case 0x12:
return "Processing Accelerator";
break;
case 0x13:
return "Non-Essential Instrumentation";
break;
default:
return "Unknown";
break;
}
}
const char* getVendor( uint32_t VendorID){
switch (VendorID)
{
case 0x8086:
return "Intel Corporation";
break;
case 0x10DE:
return "NVIDIA Corporation";
break;
case 0x1022:
return "Advanced Micro Devices, Inc.[AMD]";
break;
case 0x1002:
return "Advanced Micor Devices, Inc.[AMD/ATI]";
break;
default:
return "Vendor Unkown";
break;
}
}
uint32_t ConfigReadWord ( PCIBusAddress& PCIDeviceAddress , uint8_t offset){
outl(CONFIG_ADDRESS , PCIDeviceAddress.getAddress() | offset );
return inl(CONFIG_DATA);
}
uint32_t ConfigReadWord (uint8_t bus, uint8_t device, uint8_t func, uint8_t offset){
uint32_t address;
address = (uint32_t) (
((uint32_t) 1 << PCI_ENABLE_ADDR_SHIFT) |
((uint32_t)bus << PCI_BUS_ADDR_SHIFT) |
((uint32_t)device << PCI_DEVICE_ADDR_SHIFT) |
((uint32_t)func << PCI_FUNCTION_ADDR_SHIFT) |
offset );
outl(CONFIG_ADDRESS, address);
return inl(CONFIG_DATA);
}
uint8_t GetHeaderType( PCIBusAddress& PCIDeviceAddress ){
uint32_t header_information = ConfigReadWord(PCIDeviceAddress , 0xC);
return (uint8_t) (
((header_information >> 16) //Get higher half
& 0x00FF) // Select the last two bytes
& 0x7F ); // Mask bit 7 as it indicates if the device is a mulit function device!
}
uint16_t GetClassCodes( PCIBusAddress& PCIDeviceAddress ){
uint32_t classcodes = ConfigReadWord(PCIDeviceAddress, 0x8);
return (uint16_t)((uint32_t)classcodes >> 16);
}
bool IsMultiFunctionDevice(PCIBusAddress& PCIDeviceAddress){
uint32_t header_information = ConfigReadWord(PCIDeviceAddress, 0xC);
return (((header_information>>16)
& 0x80)
>> 7 );
}
void PrintPCIDeviceInfo (PCIBusAddress& PCIDeviceAddress)
{
uint32_t DeviceID = (GetDevice(PCIDeviceAddress.bus, PCIDeviceAddress.device, PCIDeviceAddress.function) >> 16);
uint32_t VendorID = GetDevice(PCIDeviceAddress.bus, PCIDeviceAddress.device, PCIDeviceAddress.function) & 0xFFFF;
printf("Device found!\n");
printf("Bus: %d, Device: %d, function: %d \n", PCIDeviceAddress.bus, PCIDeviceAddress.device, PCIDeviceAddress.function);
printf("DeviceID: 0x%x, Vendor: %s\n",
DeviceID
, getVendor(VendorID) );
uint8_t header_type = GetHeaderType(PCIDeviceAddress);
printf( "Header type: 0x%x\n", header_type);
uint16_t deviceClasses = GetClassCodes(PCIDeviceAddress);
printf("class: %s, subClass: %d\n\n", GetClassCodeName((deviceClasses >>8)), deviceClasses & 0xFF);
}
void PCI_Enumerate(){
int devicesFound = 0;
printf("Start finding devices, Found: %d devices");
// loop through all possible busses, devices and their functions;
for( int bus = 0 ; bus < 256 ; bus++)
{
for(int device = 0; device < 32 ; device ++)
{
int function = 0;
//uint64_t DeviceIdentify = ConfigReadWord(bus, device, function,0x0);
uint32_t DeviceID = GetDevice(bus, device, function) >> 16;
if( DeviceID != 0xFFFF){
PCIBusAddress busAddress =
PCIBusAddress{bus, device, function };
PrintPCIDeviceInfo(busAddress);
// iterate over the functions if it is a multi function device!
if( IsMultiFunctionDevice(busAddress) ){
printf("Multi function device! \n");
printf("Check remaining Functions\n");
for ( function = 1 ; function < 8; function++)
{
uint32_t DeviceID = GetDevice(bus, device, function) >> 16;
if( DeviceID != 0xFFFF){
PCIBusAddress busAddress2 = PCIBusAddress{bus, device, function};
PrintPCIDeviceInfo(busAddress2);
devicesFound++;
}
}
}
devicesFound++;
}
}
}
printf("Found %d PCI devices!\n", devicesFound);
}
uint8_t GetProgIF (PCIBusAddress& PCIDeviceAddress){
uint32_t data = ConfigReadWord(PCIDeviceAddress, 0x8);
return ((data >> 8) & 0xFF);
}
uint32_t ReadBAR ( PCIBusAddress& PCIDeviceAddress, int bar_number){
int offsetToBar = 0x10 + (bar_number* 0x4);
return ConfigReadWord(PCIDeviceAddress, offsetToBar);
}