BarinkOS/kernel/storage/ide/ideCommands.h

86 lines
2.6 KiB
C

#pragma once
// Commands
#define ATA_CMD_READ_PIO 0x20
#define ATA_CMD_READ_PIO_EXT 0x24
#define ATA_CMD_READ_DMA 0xC8
#define ATA_CMD_READ_DMA_EXT 0x25
#define ATA_CMD_WRITE_PIO 0x30
#define ATA_CMD_WRITE_PIO_EXT 0x34
#define ATA_CMD_WRITE_DMA 0xCA
#define ATA_CMD_WRITE_DMA_EXT 0x35
#define ATA_CMD_CACHE_FLUSH 0xE7
#define ATA_CMD_CACHE_FLUSH_EXT 0xEA
#define ATA_CMD_PACKET 0xA0
#define ATA_CMD_IDENTIFY_PACKET 0xA1
#define ATA_CMD_IDENTIFY 0xEC
#define ATAPI_CMD_READ 0xA8
#define ATAPI_CMD_EJECT 0x1B
#define ATA_IDENT_DEVICETYPE 0
#define ATA_IDENT_CYLINDERS 2
#define ATA_IDENT_HEADS 6
#define ATA_IDENT_SECTORS 12
#define ATA_IDENT_SERIAL 20
#define ATA_IDENT_MODEL 54
#define ATA_IDENT_CAPABILITIES 98
#define ATA_IDENT_FIELDVALID 106
#define ATA_IDENT_MAX_LBA 120
#define ATA_IDENT_COMMANDSETS 164
#define ATA_IDENT_MAX_LBA_EXT 200
#define IDE_ATA 0x00
#define IDE_ATAPI 0x01
#define ATA_MASTER 0x00
#define ATA_SLAVE 0x01
#define ATA_REG_DATA 0x00
#define ATA_REG_ERROR 0x01
#define ATA_REG_FEATURES 0x01
#define ATA_REG_SECCOUNT0 0x02
#define ATA_REG_LBA0 0x03
#define ATA_REG_LBA1 0x04
#define ATA_REG_LBA2 0x05
#define ATA_REG_HDDEVSEL 0x06
#define ATA_REG_COMMAND 0x07
#define ATA_REG_STATUS 0x07
#define ATA_REG_SECCOUNT1 0x08
#define ATA_REG_LBA3 0x09
#define ATA_REG_LBA4 0x0A
#define ATA_REG_LBA5 0x0B
#define ATA_REG_CONTROL 0x0C
#define ATA_REG_ALTSTATUS 0x0C
#define ATA_REG_DEVADDRESS 0x0D
// Channels:
#define ATA_PRIMARY 0x00
#define ATA_SECONDARY 0x01
// Directions:
#define ATA_READ 0x00
#define ATA_WRITE 0x01
// Status
#define ATA_SR_BSY 0x80 // Busy
#define ATA_SR_DRDY 0x40 // Drive ready
#define ATA_SR_DF 0x20 // Drive write fault
#define ATA_SR_DSC 0x10 // Drive seek complete
#define ATA_SR_DRQ 0x08 // Data request ready
#define ATA_SR_CORR 0x04 // Corrected data
#define ATA_SR_IDX 0x02 // Index
#define ATA_SR_ERR 0x01 // Error
// Errors
#define ATA_ER_BBK 0x80 // Bad block
#define ATA_ER_UNC 0x40 // Uncorrectable data
#define ATA_ER_MC 0x20 // Media changed
#define ATA_ER_IDNF 0x10 // ID mark not found
#define ATA_ER_MCR 0x08 // Media change request
#define ATA_ER_ABRT 0x04 // Command aborted
#define ATA_ER_TK0NF 0x02 // Track 0 not found
#define ATA_ER_AMNF 0x01 // No address mark