source/kernel/boot/boot.s

@@ -101,9 +101,7 @@ isPaging:
 	# movl $0, boot_page_directory + 0
 
 
-
+	call kernel
-
-	call early_main
 
 	cli
 1:	hlt
@@ -115,4 +113,18 @@ isPaging:
 .include "./source/kernel/irq_table.s"
 .include "./source/kernel/interrupts/idt.s"
 
+.globl jump_usermode
+jump_usermode:
+    mov $((4*8) | 3) , %ax
+    mov %ax, %ds
+    mov %ax, %es
+    mov %ax, %fs
+    mov %ax, %gs
 
+    mov %esp, %eax
+    push $( (3*8) | 3)
+    push %eax
+    pushf
+    push $( ( 3 * 8) | 3)
+    push startSuperVisorTerminal
+    iret

source/kernel/definitions.h

@@ -4,6 +4,6 @@
  */
 
 #define __DEBUG__ false
-#define KERNEL_VERSION 0
+#define KERNEL_VERSION 0.03
 
 #define ARCHITECTURE "I386"

source/kernel/kernel.cpp

@@ -21,6 +21,7 @@ extern "C"{
 #include "interrupts/idt.h"
 #include "serial.h"
 extern "C"  void LoadGlobalDescriptorTable();
+extern "C" void jump_usermode();
 
 void set_protected_bit()
 {
@@ -63,18 +64,13 @@ extern "C" void kernel ()
 
     printf("Enable Protected mode and jump to kernel main\n");
 
-    // Set the protected bit of control register 0 
+    set_protected_bit();
-    // this will put the CPU into protected mode
-    // NOTE: This should really be a assembly procedure 
-    // We cant directly write to control register 0 
-    // therefor we copy the value of control register 0 into eax
-    // once we are done manipulating the value we write the value in 
-    // eax back to control register 0 
 
-	asm volatile("mov %cr0, %eax ");
+#ifdef USERMODE_RELEASE
-    asm volatile("or $1, %eax");
+    // Lets jump into user mode
-    asm volatile("mov %eax, %cr0");
+    jump_usermode();
-
+#else
-    pit_initialise();
+    startSuperVisorTerminal();
+#endif
 
 }

source/kernel/supervisorterminal/superVisorTerminal.cpp

@@ -4,7 +4,13 @@
 #include "../filesystem/FAT/BiosParameterBlock.h"
 #include "../filesystem/FAT/DirectoryEntry.h"
 bool isRunning = true;
-void startSuperVisorTerminal(){
+extern "C" void startSuperVisorTerminal()
+{
+    /*
+    * Show a little banner for cuteness
+    */
+    printf("|===    BarinkOS       ===|\n");
+
     while (isRunning){
            
            printf("SUPERVISOR:>$ " );
@@ -115,7 +121,7 @@ void startSuperVisorTerminal(){
                 uint16_t biosparameterblock[256];
                 ATA_DEVICE::Read(BUS_PORT::Primary, DEVICE_DRIVE::MASTER, mbr->TableEntries[0].LBA_partition_start, biosparameterblock);
 
-                BiosParameterBlock*  bpb =  (BiosParameterBlock*) biosparameterblock;
+                auto*  bpb =  (BiosParameterBlock*) biosparameterblock;
                 
 
                 printf("\nBPB: Bytes per Sector %d\n", bpb->BytesPerSector );
@@ -138,8 +144,8 @@ void startSuperVisorTerminal(){
                 ATA_DEVICE::Read(BUS_PORT::Primary, DEVICE_DRIVE::MASTER, FATAddress, FAT );
 
                 // Show data in terminal
-                for(int i = 0; i < 256; i++ ) {
+                for(unsigned short i : FAT) {
-                    printf("%x ", FAT[i]);
+                    printf("%x ", i);
                 }
                 kterm_put('\n');
 
@@ -149,33 +155,35 @@ void startSuperVisorTerminal(){
 
                 uint16_t data2 [256];
                 ATA_DEVICE::Read(BUS_PORT::Primary, DEVICE_DRIVE::MASTER, RootDirectoryRegion, data2 );
-                DirectoryEntry* RootDirectory = (DirectoryEntry*) data2;
+                auto* RootDirectory = (DirectoryEntry*) data2;
                 // List files in root
                 for(int i= 0; i < bpb->NumberOfDirectoryEntries ; i++ )
                 {  
-                DirectoryEntry* entry = (DirectoryEntry*)((uint32_t) RootDirectory + (i  * sizeof(DirectoryEntry)));
+                auto* entry = (DirectoryEntry*)((uint32_t) RootDirectory + (i  * sizeof(DirectoryEntry)));
 
                 if( entry->filename[0] == (uint8_t) 0x00 )
                     break; // There are no more entries in this directory or the entry is free
                     
-                if( entry->attribute & 0x01 == 0x01 || entry->attribute & 0x20 == 0x20)
+                if( (entry->attribute & 0x01) == 0x01 || (entry->attribute & 0x20) == 0x20)
                     continue; // Skip listing if hidden or Achieve flag is set
 
                 // Print the filename;
-                for( int n = 0; n < 8; n++ ){
+                for(char n : entry->filename){
-                    if(entry->filename[n] == 0x20)
+                    if(n == 0x20)
                         break;
-                    kterm_put(entry->filename[n]);
+                    kterm_put(n);
-                }kterm_put('\n');
+                }
+                kterm_put('\n');
 
-                for( int n = 0; n < 3; n++){
+                for(unsigned char n : entry->Extension){
-                    kterm_put(entry->Extension[n]);
+                    kterm_put(n);
-                }kterm_put('\n');
+                }
+                kterm_put('\n');
 
                 printf("Attribute: %x \n" , entry->attribute);
                 printf("FileSize: %d Bytes\n", entry->FilesizeInBytes);
 
-                if( entry->FilesizeInBytes != 0x0 || entry->attribute & 0x8 == 0x0){
+                if( entry->FilesizeInBytes != 0x0 || (entry->attribute & 0x8) == 0x0){
                     printf("Show contents");
 
                     printf( "Start cluster of the file: 0x%x\n" , entry->StartingCluster);
@@ -187,11 +195,11 @@ void startSuperVisorTerminal(){
 
                     uint16_t dataBlob [256];
                     ATA_DEVICE::Read(BUS_PORT::Primary, DEVICE_DRIVE::MASTER, sector, dataBlob );
-                    for( int n = 0; n < 256; n++)
+                    for(unsigned short n : dataBlob)
                     {
-                        kterm_put(dataBlob[n] & 0x00ff);
+                        kterm_put(n & 0x00ff);
 
-                        kterm_put(dataBlob[n] >> 8);
+                        kterm_put(n >> 8);
                     }kterm_put('\n');
 
 

source/kernel/supervisorterminal/superVisorTerminal.h

@@ -8,4 +8,4 @@ extern "C" {
     #include "../../lib/include/string.h"
 }
 
-void startSuperVisorTerminal();
+extern "C" void startSuperVisorTerminal();